Models For Use With Your Own Tank or Sump
Lite Duty & General Purpose Models
These models are to be used with your own Tank or Sump. Our Lite Duty models are best used in
production operations that require minimal set up changes. This is our least expensive model, but does not provide the flexibility to be moved quickly from machine to machine unit. Lite Duty models generate a very fine spray mist. For units generating a heavier spray and mist, Please see our General Purpose models.
Lite duty models include the following features:
Simplest of the Systems: The controls of these units are mounted permanently to the machine, close to the operator and the cut.
No Coolant Tank Furnished: Coolant mix may be placed in the machine sump, or in any clean container that will not contaminate the coolant. If the sump is used the conventional flood coolant pump must be made inoperative.
Coaxial Coolant Line: Coolant and compressed air are not mixed until they reach the nozzle. To overcome the need for dual lines, Kool Mist has developed a coaxial line, or a hose within a hose. Coolant line exteriors may be nylon braided for normal duty, or metal braided from protection from hot chips and abrasion.
Easy to Use Control: Output from each nozzle is regulated by a single knob on the control. Mist Spray may be turned on or off instantly to coordinate with the cutting cycle, and the spray mix made lean or rich as needed. Nozzle position can be a permanent mount or the flexible magnetic base. Straight nozzle is standard. 45 and 90 deg. nozzles are available.