Every once in a while something new comes to our industry. Usually it is a modificastion of something old but the Dust Funnel by Denray Machines is an entirely new concept in dust collection. Invented by the owner of Denray Machine, Dennis Rayon, this totally unique collection system will probably change CNC owners handle their cleanup. Denray Machines has been producing specialtyt dust collection systems since 1991 and since that time has shipped out over 10,ooo untis world wide. Here is what Denray has to say about their new Dust Funnel System:
Is the blow-off dust from your CNC Routers and other machines leaving an excessive amount of airborne dust in your factory?
Then Denray's Dust Funnel is for you! Now your blow-off dust can be captured into your dust collection system.
Each section at 42 in. wide will provide you the desired length you need for any CNC Router configuration just by adding multiple units together
A 42 in. section (single unit) requires 1,500 CFM for dust blown into unit
With hinges attached, you can create a plywood bridge which will give you the opportunity to lift up to any router (pictured to the left)
Multiple units can be set into any length; each unit requires a 5 in. intake hose
3 sections (triple unit) provides 10.5 ft. length and 24 in. depth (with duct pipe). This combination will work for most applications routing on 8 ft. sheets
A triple unit (10.5 ft.) requires 3,000 - 3,500 CFM
For a powerful backdraft suction of airborne dust from the router, 10,000 CFM will be required for 3 sections. Each section will require an 8 in. inlet (must be noted when ordering)
Denray's Dust Funnel is the first of its kind! With so many length variations possible, it's sure to fit your needs!
This item ships from:
Mt Vernon, MO
Generally 2-3 Weeks
Currently there are no reviews available for this product. Be the first to write a review.