The Euro-Uniguide features a set of aluminum guide rails, with four polycarbonate templates attached with thumb screws.Each template has a slot to accommodate ceramic composite drill guide bushings. The drill guide bushings can be located any where within the range of the slot, allowing the tool to be adjusted to match any brand of drawer guide hardware.The templates are vertically adjustable to the users requirements.
If you are using 5mm screws for attaching your drawer slides you will need to predrill with the Euro Bit and a 5mmm Drill bit. If you are using #6 wood screws you will need to predrill with the Euro Bit, the 7/634" bit adapater and a 7/64" bit (not Included).
Designed to be used with the Euro Bit self centering drilling tool.