5 X No Holes Trizact Film A00 Micron White 1 Pc. Pac/
$5.19
Produced with 3Ms new micro replication technology, this film backed abrasive ensures a fast, consistent cut rate through the long life of the abrasive. Fantastic results on solid surface composites, plastics and glass defect repair. Used for damp finishing of solid surface, glass and acrylic materials.
Sanding Stepsf or SolidSurface Materials:
MATTE FINISH
OPTIONAL PRE-STEP 3M 366L 100 micron
(if necessary to level rough surface)
STEP 1 3M 268XA A35 (Green)- Use dry or with light to
medium water mist. Finish with 3M 268XA A10 - light to medium water mist or 3M 7447 Scotch-Brite pad
SEMI-GLOSS FINISH
OPTIONAL PRE-STEP 3M 366L 100 micron
(if necessary to level rough surface)
STEP 1 3M 268XA A35 (Green)- Use dry or with light to medium water mist. Finish with 3M 268XA A10 - light to medium water mist or 3M 7447 Scotch-Brite (Maroon)pad
STEP 2 3M 268XA A10 (Blue)- light to medium water mist. Finish with 3M 268XA A5 - light to medium water orist
3M 7448 Scotch-Brite pad (Grey).
High-Gloss Finish
OPTIONAL PRE-STEP n 3M 366L 100 micron
(if necessary to level rough surface)
STEP 1 3M 268XA A35 - light to medium water mist
STEP 2 3M 268XA A10 - light to medium water mist
STEP 3 3M 268XA A5 - light to medium water mist
STEP 4 3M 568XA - medium to heavy water mist
Repeat step 4 if necessary
Rinse debris from Trizact disc
after each use, and wipe surface
clean fo l l owing each step to minimize
contamination scra t ch e s .
Currently there are no reviews available for this product. Be the first to write a review.